HTH Pre-measured Water Soluble Pods Alkalinity Up, 4 lbs.

Balancing your pool has never been easier with the HTH Pre-measured Water Soluble Alkalinity Up Pods.
BUY NOW

About This Item

The easy-to-use pods raise the alkalinity in your pool to an ideal range between 60 and 120 parts per million (ppm). If the total alkalinity is too low, your pH levels will fluctuate excessively. Maintaining proper pH levels allows your sanitizer to work more effectively, which can reduce equipment corrosion, cloudy water, scaling and skin dryness. Alkalinity pods are compatible with salt water systems. TO USE:  Always be sure the pump is running when testing the water or adding chemicals.  Test the water using the HTH Multi-purpose 6-Way Test Strips, and make sure the skimmer is empty and does not contain any chemical residue or debris. If the alkalinity is below 60 ppm, add the amount of product as directed on the package. You should add pods one a time into the skimmer, waiting until each pod completely dissolves before adding another. Or, add the appropriate number of pods spread evenly around the deep end of the pool, dispersing any undissolved chemical from the bottom of the pool with a brush.

  • Each pouch contains eight HTH Pre-measured Water Soluble Pods Alkalinity Up
  • Raises alkalinity in the pool
  • Easy-to-use pods make applying the correct dosage simple and quick
  • Keeps pH levels in range so pool sanitizer works more effectively
  • Apply alkalinity pods directly to pool or skimmer with pump running; follow package instructions for best results
  • Works with all sanitizer systems, including salt
  • Made in the USA

ladies floating in water

REVIEWS



Keep Water Balanced with HTH Alkalinity Up Pods


HTH Alkalinity Up Pods product

Raise Alkalinity

The HTH Pre-measured Water Soluble Pods Alkalinity Up pods raise the alkalinity in your pool’s water. The ideal alkalinity range is between 60 – 120 ppm.

lady relaxing in pool

Allow Sanitizers to Work Properly

If alkalinity is too low, pH levels will fluctuate excessively. Maintaining proper pH allows your sanitizer to work more effectively.

HTH Pods

Easily Measure Doses

The easy-to-use pods make it simple to apply the correct dosage to your pool. Just drop pods one at a time into the skimmer or spread evenly around the deep end of the pool.


Test, Balance and Shock Pool Water Weekly


test strip canister line graphic image

Test Water Levels

When your pool is out of balance, your sanitizers can be less effective. Unbalanced water can also cause skin and eye irritation, and it can even damage the pool’s surfaces, structure or equipment. Use the HTH Multi-purpose 6-Way Test Strips to check alkalinity, pH and chlorine levels two to three times a week.  

pod floating in water line graphic image

Balance Alkalinity & pH Levels

To get the most out of your sanitizer, take care to balance your pool water. First, make sure alkalinity levels are between 60 – 120 ppm. Use HTH Pre-measured Water Soluble Pods Alkalinity Up to raise alkalinity if needed. Next, balance the pH – ideal range is 7.2 – 7.8. Use HTH Pre-Measured Water Soluble Pods pH Up to raise the pH and HTH Pre-Measured Water Soluble Pods pH Down to decrease the pH.

pool chemical packet line graphic image

Use HTH Super Shock! Treatment

Kill unwanted bacteria and algae and give your pool the boost of chlorine it needs to keep your water clean and clear. This multi-purpose product sanitizes, clarifies, shock treats and helps prevent algae your pool. It’s easy to use, and it won’t over-stabilize your pool.

boys playing on floats in water