HTH Pre-measured Water Soluble Pods pH Up, 4 lbs.

Balancing swimming pool water just got easier. Introducing HTH Pre-measured Water Soluble Pods pH Up. Formulated to increase the pH of your swimming pool water, these water-balancing pods make dosing quick and easy; you can even add them directly to the pool water or skimmer.
BUY NOW

About This Item

Best of all, this pH increaser is also compatible with saltwater systems. Maintaining pH in the proper range will allow your sanitizer to work more effectively which can help to reduce equipment corrosion, eye irritation and skin dryness. Reduce pH drift by testing the total alkalinity each week and maintaining it between 60 and 120ppm. TO USE: First, test the pH of the water every time you apply sanitizer. Always be sure the pump is running when testing the water or adding chemicals. If adding a pod directly to the skimmer, add only one at a time and allow the pod to dissolve completely before adding more. If adding directly to pool water, add the appropriate number of pods around the deep end of the pool. If multiple pods are added at one time, they should be distributed evenly around the deep end and should not be concentrated in one place. Disperse any undissolved chemical from the bottom of the pool with a pool brush until the chemical is completely dissolved. Add the appropriate number of pods to raise and maintain the pH between 7.2 and 7.8.

Contains one pouch of eight HTH Pre-measured Water Soluble Pods pH Up
Easy-to-use pods give you the right amount of pH increaser
Raises the pH of swimming pool water; it may also increase total alkalinity
Allows sanitizer to work more effectively, which can help to reduce equipment erosion, skin irritation and eye irritation caused by pool water having a low pH
Made in the USA

REVIEWS

Balance With HTH Pre-measured Water Soluble Pods

Raises pH and Alkalinity of Water

If your pool’s pH level is too low (lower than 7.2), try HTH Premeasured Water Soluble Pods pH Up to raise the pH levels and total alkalinity of the water.

Allows Sanitizers to Work More Effectively

Did you know your pool sanitizer works best when pH is between 7.2 and 7.8? Get the most out of your swimming pool sanitizer by balancing the water first.

man and woman with baby swimming underwater

Improves Comfort of Swimmers

If the pool water has pH that’s too low or too high, eye and skin irritation can occur. Keep everyone comfortable with properly balanced water.

How to Use HTH Pre-measured Water Soluble Pods

1. Test pH Levels

Use HTH Multi-Purpose 6-Way Test Strips to test the pH level. The ideal pH range is between 7.2 and 7.8. If the pH is too low, raise it with HTH Premeasured Water Soluble Pods pH Up.

2. Determine Number of Pods

Looking at the instruction labels on the back of the pack, determine necessary number of pods depending on pool volume (gallons) and pH level from step 1.

3. Apply Directly to Water or Skimmer

With the pump running, add to pool skimmer or directly to the pool water spread evenly around the deep end of the pool. Use a pool brush to disperse any undissolved chemicals.