HTH® Super Shock! Treatment, 1 lb.

This is an effective, multi-purpose product that sanitizes, clarifies, helps prevent algae and shock treats your pool.

Sizes Available:

About This Item

HTH® Super Shock! Pool Shock Treatment is the 4-in-1 powerful pool shock designed to boost chlorine levels, and kill and prevent bacteria and algae for a clear, healthy pool. Each pound of Super Shock! packs a powerful punch, treating 13,500 gallons and restoring crystal clarity in just 24 hours! This pool shock is great for all pool types and won’t fade your pool liner. Test and apply shock treatment directly to your swimming pool every week to keep free available chlorine levels between 1 and 4ppm for healthy swimming conditions.

TO USE: Make sure your pH level is between 7.2 and 7.8 and adjust if needed. Check that your pump is running and then snip the corner of the shock product. Broadcast evenly over a wide area in the deepest part of your pool. If the granules settle at the bottom, use a brush to disperse them. When your free available chlorine levels are between 1 and 4 ppm, your pool is ready for action.

  • Kills bacteria
  • Destroys algae
  • Restores crystal clarity to water
  • Fast acting & fast dissolving
  • Will not cause overstabilization
  • 1 bag treats 13,500 gallons
Stay clear all summer long banner


Shock Your Pool for Crystal Clear Water In 24 Hours

HTH Pools - Lady swimming in blue swimming pool water

Boost Chlorine

Chlorine sanitizes your pool to remove bacteria and other hazardous contaminants to keep water clean. Use HTH® Super Shock! Treatment to restore chlorine levels that have been depleted by the sun, rain and heavy use.

HTH Pools - above ground pool with wraparound deck

Kill Bacteria & Algae

Low chlorine levels, poor water circulation and warm weather can encourage bacteria and algae growth. Rid your pool of black algae, mustard algae and green algae and prevent regrowth by shocking your pool once a week. Don’t forget to brush the floor and walls of the pool.

HTH Pools - Girl under water image

Keep Water Clear

The fast-dissolving formula found in HTH® shock treatments acts quickly to restore clarity to your water so you can be back in the swimming pool within 24 hours. Plus, the treatment won’t overstabilize your pool or fade your liners.

How to Use HTH® Super Shock! Treatment

pH line graphic image

1. Test pH Levels

Dip an HTH® Multi-purpose 6-Way Test Strip (sold separately) into the water to measure total alkalinity, pH, free available chlorine (FAC), calcium hardness, and cyanuric acid (CYA) or stabilizer. Balance water, and adjust alkalinity and pH levels, where applicable.

pool chemical packet line graphic image

2. Apply Directly to Water

Before handling any chemicals, put on protective gloves and goggles. During evening hours and with the pump running, broadcast the HTH Super Shock! Treatment evenly over a wide area in the deepest part of your pool.

chlorine line graphic image

3. Wait & Test Chlorine Levels

If granules settle along the bottom of the pool, use a brush to disperse until granules are dissolved. Once free available chlorine levels are between 1 and 4 ppm, your pool is ready to use again.




Day After